Which Gate Motor Do I Need for My Gate’s Weight?

Quick answer: Find out roughly what one gate leaf weighs, then choose a motor whose maker rating sits clearly above that figure. Sliding motors are rated mainly by gate weight, and some also give a maximum gate length. Swing motors are rated by leaf length and leaf weight together, so check both numbers. Every figure below is taken from the manufacturer data shown on our product pages.

Step 1: Estimate the gate weight

  • Look for the steel sizes or a finished weight on the fabricator’s drawing or invoice.
  • Solid sheet, cladding or timber infill weighs far more than open bars or mesh of the same size.
  • Measure the length and height of each leaf. On a sliding gate, include the tail that runs past the opening.
  • If the gate has been reinforced or has extra panels added, assume it is heavier than it looks.

Step 2: Leave headroom

A maker’s rating is the limit under good conditions. Stiff wheels, sand in the track and wind on solid panels all add load, so a motor sized to the exact gate weight works near its limit every time it runs. Choosing the next class up gives smoother starts and stops and less heat build-up.

Sliding gate motors by gate weight

Gate weight (up to)Example models we listMaker figures shown on our product page
400 kgNice ROBUS 400400 kg, gate length up to 5 m, 24 V DC
500 kgCenturion D5-Evo SMARTup to 500 kg
600 kgNice ROBUS 600; BFT DEIMOS BT A600ROBUS 600: 600 kg, up to 8 m. DEIMOS BT A600: 600 kg, intensive use
800 kgSommer RUNner 800; Roger R30 800RUNner: 800 kg, gate travel up to 13 m, duty cycle S3 40 %. R30: 800 kg, 230 V AC
1,000 kgNice ROBUS 1000; BFT ARES BT A1000ROBUS 1000: 1,000 kg, up to 12 m. ARES BT A1000: 1,000 kg, intensive use
1,200 kgBeninca BULL 1224 TURBO; CAME BK 1200BULL 1224: 1,200 kg, duty cycle 80 %. BK 1200: up to 1,200 kg, gate length up to 20 m
1,500 kgNice RUN 1500; BFT ARES BT A1500RUN 1500: 1,500 kg, 60 cycles per hour. ARES BT A1500: 1,500 kg, intensive use
1,800–2,500 kgFAAC 844; BFT ICARO SMART AC A2000; Nice RUN 2500844: 1,800 kg, use frequency 70 %. ICARO A2000: 2,000 kg, very intensive use. RUN 2500: 2,500 kg, up to 18 m
3,500–4,500 kg (three-phase 400 V)BFT SP3500; Beninca BISON 45 OTISP3500: 3,500 kg, very intensive use. BISON 45: 4,500 kg, intensive use

The two heaviest models run on a three-phase 400 V supply, so check that the site has one before choosing them. Where a page gives a maximum gate length, stay inside both the weight and the length.

Swing gate motors by leaf length and weight

Leaf length (up to)Example models we listMaker figures shown on our product page
2 mNice WINGO4KIT (2 x WG4000)leaves up to 2 m, 30 cycles per hour
2.5 mBFT PHOBOS AC A25; FAAC 415PHOBOS A25: 2.5 m and 400 kg, semi-intensive use. FAAC 415: 2.5 m (3 m with an electric lock), S3 30 %
3 mCAME ATI 3000; Beninca BOB30MATI 3000: 3 m at 400 kg, 2.5 m at 600 kg or 2 m at 800 kg, 24 cycles per hour. BOB30M: 3.0 m, duty cycle 30 %
4 mBFT ATHOS AC A40; BFT PHOBOS BT B40ATHOS A40: 4 m and 400 kg, semi-intensive use. PHOBOS BT B40: 700 kg, 4 m with an electric lock (3 m without); BFT says the weight and length limits do not apply together
5 mCAME ATI 5000; Beninca BOB50MATI 5000: 5 m and 400 kg, 15 cycles per hour. BOB50M: 5.0 m, duty cycle 30 %

The CAME ATI 3000 shows why both numbers matter: the same motor is rated for 800 kg on a 2 m leaf but only 400 kg on a 3 m leaf. A long, solid leaf also catches more wind, which adds load on top of its weight.

Duty cycle and how often the gate opens

Weight is only half the choice. Makers also state how hard a motor can work, in one of three ways:

  • A usage class, such as semi-intensive, intensive or very intensive. Higher classes are meant for gates that open many times a day.
  • Cycles per hour, the number of full open-and-close movements the motor is rated for in an hour.
  • A duty-cycle percentage (for example S3 30 % or 80 %): the share of time the motor can run before it needs to rest and cool.

A gate used a few times a day sits comfortably in a lower class. A shared entrance, a building car park or a commercial yard that opens all day needs a motor rated for intensive or very intensive use, or a higher cycles-per-hour figure. In summer, high outdoor temperatures add to the heat a motor builds up as it runs. If a gate is busy, choose more duty headroom, not just more weight capacity. Where a product page lists an operating temperature range, that is the range the maker rates the motor for.

When to ask us

Send the leaf length, height, infill type and an estimate of how many times a day the gate opens, with a photo. We will check them against the maker limits and suggest models from the tables above. We supply and install across Dubai, Sharjah, Abu Dhabi and Ajman, with delivery to all UAE emirates.

Frequently asked questions

What happens if my gate motor is too small for the gate?

It works at or beyond its limit every time it moves. The gate may slow down, stop part-way or reverse as if it hit an obstacle, and the motor runs hotter. The fix is a motor with a higher maker rating, or making the gate lighter and freer-running first.

Is a sliding motor rated for 600 kg enough for a 580 kg gate?

It leaves almost no headroom. Track friction, sand and wind can push the real load above the gate’s own weight, so the next class up (800 kg here) is the safer choice.

Why do swing motors list leaf length as well as weight?

A swing motor pushes the leaf from near the hinge, so a longer leaf needs more force to move the same weight, and it catches more wind. Some makers give several length and weight pairs for one motor, so check the pair that matches your leaf.

Does a busy gate need a different motor from a quiet one?

Yes. Choose by usage class, cycles per hour or duty-cycle percentage as well as weight. A motor rated for intensive use suits gates that open many times a day.

Can one motor be used on a long but light sliding gate?

Sometimes. Check the maximum gate length or gate travel on the product page as well as the weight. For example, the Nice ROBUS 600 page lists 600 kg and 8 m.

Related guides