Gate Photocell Not Working? Why Your Gate Won’t Close
If your gate photocell is not working, the gate usually opens but will not close, or it reverses part-way. Photocells are a pair of safety sensors that send an infrared beam across the gateway. Anything that breaks the beam, from a parked car to dust on a lens, makes the control board stop the gate.
How gate photocells work
One unit sends an invisible infrared beam across the opening and the other receives it. If something breaks the beam while the gate is closing, the control board stops or reverses the gate, depending on its settings. Centurion’s D5-Evo wiring diagrams show separate closing and opening safety beams, and the installer can set how far the gate travels after a beam is broken.
Gate won’t close and the sensor is blocked
The most common cause is simple: something is in the beam. CAME’s fault table for the AXL lists “the gate opens but does not close” with the fix “check that there are no obstructions in the photocells’ area of operation”. Look for:
- a parked car, bin, plant pot or delivery left in the gateway
- plants or branches that have grown into the beam
- sand, dust or a spider’s web on the lens
Owner-safe checks
With the gate stopped and the area clear:
- Clear the path. Remove anything between the two sensors.
- Clean both lenses. Wipe gently with a soft, dry or slightly damp cloth. Dust builds up quickly in Dubai.
- Look for knocks. If a post or sensor has been hit by a car or moved, the two units may no longer face each other. Note it, but don’t loosen anything.
- Read the indicator, if fitted. On the D5-Evo controller, a safety beam input is shown by a green LED, and that LED goes out when the beam is broken. Other brands differ, so check your user documents.
Photocell alignment
Photocell alignment means the transmitter and receiver point straight at each other. If you can see that a unit has been knocked or turned, that’s the likely cause. Re-aligning and fixing the units involves opening the housings and sometimes the power connections, so it’s a technician job. A technician should then confirm that the gate stops and reverses correctly.
Sun and photocells
If the gate misbehaves only at certain times of day, note the time and whether the sun shines straight onto either sensor. Tell your technician, who can check the position against the photocell manufacturer’s installation instructions for your model.
How to tell if a photocell is faulty
If the path is clear, the lenses are clean and nothing has been knocked, but the gate still won’t close, the photocell, its wiring or its power supply may be faulty. Some control boards can test their photocells automatically. Benincà’s BULL20M, for example, has a photocell testing output. Diagnosing the cause from there is technician work.
Never bridge or bypass photocells
Photocells are safety devices. Disconnecting or bridging them to make the gate close removes protection for people and cars. For more on running a gate without photocells, see the FAQ in our gate motor not working guide.
When to message us
Message us if the gate still won’t close after you’ve cleared and cleaned the sensors, if a sensor is damaged, or if the gate reverses at random. Send a photo of both sensors and your motor model.
Related guides: Gate motor not working: troubleshooting checklist.
Shop photocell sensors, including gate photocell sensor, BFT photocells, VDS photocells and Somfy photocells.
Need help? WhatsApp or call 058 946 7663. Gates we install come with a 1-year product warranty plus a separate 1-year installation warranty with one free maintenance visit.
Looking at a photocell? Read the gate photocell sensor details and send us a gate photo to confirm the fit.
Frequently asked questions
Why won’t my gate close because of the photocell?
The control board treats a broken beam as an obstacle, so it stops or reverses the gate. Something in the gateway, dirt on a lens, or a sensor knocked out of line can all break the beam. Clear the path and clean both lenses first.
How do I align gate photocells?
Owners can check whether either sensor or its post has been knocked or turned. Re-aligning and fixing the units involves opening the housings, so a technician should do it and then confirm the gate stops and reverses correctly.
How do I test if a gate photocell is faulty?
If the beam path is clear, the lenses are clean and nothing has been knocked, but the gate still will not close, the photocell, its wiring or its power may be faulty. A technician can test it with the control board.
Can sunlight affect gate photocells?
If your gate only misbehaves at certain times of day, note the time and whether the sun shines straight onto a sensor. Tell your technician, who can check the position against the manufacturer’s instructions for your model.
What is a photocell on an automatic gate?
A pair of small sensors, one each side of the gateway. One sends an invisible infrared beam and the other receives it. If the beam is broken while the gate is moving, the control board stops or reverses the gate.
What are common problems with photocells?
An object or plants in the beam, dust or sand on a lens, a sensor knocked out of line, and faults in the sensor, its wiring or its power supply.
Is it safe to run a gate with the photocells disconnected?
No. Photocells are safety devices. Bridging or disconnecting them removes protection for people and cars. Have a technician repair them.
