Ditec Entrematic photocell pair

Gate Safety Edge: How Sensing Edges Protect People and Cars

A gate safety edge is a sensitive rubber strip fitted along the leading or closing edge of an automatic gate. If the moving gate presses against a person, car or object, the edge signals the control board, and the motor responds as its settings define. This guide covers what a sensing edge on an automatic gate does and the signs of a safety edge fault. It also covers what owners can safely check and how edges work alongside photocells.

What a gate safety edge does

Photocells watch a beam across the opening, but they can’t detect contact along the full edge of the gate. A safety edge covers that contact point. CAME’s installer instructions for the AXL say that to pass the collision force test, a suitable sensitive safety-edge should be used and installed and adjusted properly. Centurion advises recommending safety edges and safety beams for extra protection against entrapment and other mechanical risks.

Types of sensing edge

Edges connect to the control board through a safety input, and boards accept different signal types:

  • Contact edges. These use a switching contact (normally closed or normally open, depending on the board).
  • Resistive edges (8.2 kΩ). These use an 8.2 kΩ constant resistance. The Nice RUN control unit’s STOP input accepts normally closed, normally open or 8.2 kΩ constant-resistance devices and recognises the type itself. Benincà’s BULL20M has an “input for N.C or 8K2 sensitive edge”.

Which type your gate has depends on the edge and the control board, so check the documents from your installation.

Safety edges and photocells: why many gates use both

Photocells stop a gate before it reaches something in the beam. A safety edge reacts when the gate actually makes contact. They protect different moments, so they complement each other. Your installer chooses the combination based on the gate and the manufacturer’s instructions.

Signs of a safety edge fault

  • The gate reverses when nothing touches it. A damaged edge or cable can send a false activation.
  • The gate won’t close normally. A safety input that reports a problem can stop normal movement; a technician can check which input is active.
  • Visible damage. Look for a split, crushed or loose rubber profile, or a cable that’s pulled or pinched where it moves with the gate.

Owner-safe checks

With the gate stopped and the area clear:

  1. Look along the full length of the edge for cuts, crushing or a profile pulling away from its channel.
  2. Look at the cable where it leaves the edge and where it moves with the gate. Don’t unplug or repair it.
  3. Clear anything pressing on the edge, such as plants, a wheelie bin or debris.
  4. If your gate’s user documents describe a test, only do what they describe. Otherwise, leave testing to a technician.

How to test a gate safety edge properly

A proper test checks that the edge activates and that the motor responds correctly. Because that involves the control board and safety settings, a technician should do it with the board manufacturer’s instructions. Never bridge, bypass or remove a safety edge to make the gate work. It’s there to protect people.

When to call a technician

Call a technician if the edge is damaged, the gate reverses with nothing in the way, or the gate won’t close normally after you’ve cleared the area. Replacing an edge or rewiring it to the control board is technician work.

Related guide: Gate motor not working: troubleshooting checklist.

Browse photocell sensors, control boards, gate spare parts, sliding gate openers and swing gate openers.

Need help? WhatsApp or call 058 946 7663. Gates we install come with a 1-year product warranty plus a separate 1-year installation warranty with one free maintenance visit.

Frequently asked questions

What does a safety edge do on an automatic gate?

A safety edge is a sensitive strip along the gate’s edge. When the moving gate presses against a person, car or object, the edge signals the control board, and the motor responds as its settings define. It covers contact that photocell beams cannot see.

How do I test a gate safety edge?

Owners should only look for damage, clear anything pressing on the edge, and follow any test described in their own user documents. A full test involves the control board and safety settings, so a technician should do it.

Why does my gate reverse when nothing touches it?

A damaged edge, a split rubber profile or a pinched cable can send a false signal to the control board. Check the edge and cable for visible damage with the gate stopped. If it keeps happening, ask a technician to test the edge and its wiring.

Do I need safety edges if I have photocells?

Photocells and safety edges protect against different risks. Photocells detect something in the beam before the gate reaches it, and an edge reacts on contact. Manufacturers such as CAME and Centurion recommend sensitive edges as part of a safe installation, so many gates use both.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *