To program a gate remote, find the receiver’s learn (or PROG) button on the control board or plug-in receiver, press it, then press the remote button you want to use while the board is in learn mode. Rolling-code systems from some makers can also copy a new remote from one that already works. Check your manual first.
Step 1: identify your receiver
Look at the board inside the motor cover, or at a separate receiver box near the gate. Note the brand, the frequency on the label (often 433.92 MHz or 868 MHz) and whether it uses rolling code or a fixed DIP-switch code. A new remote must match all three.
Step 2: choose the method
| System type | How a remote is added | Example on our shop |
|---|---|---|
| Rolling code, learn button | Press learn on the board, then the remote button | Nice ON2E with Nice OXI receiver |
| Rolling code, copy from a working remote | Maker’s cloning sequence between two remotes | BFT MITTO remotes: copy to a MITTO REPLAY remote (BFT lists cloning) |
| Fixed code, DIP switches | Set the new remote’s switches to match the old one | Beninca TO.GO WP (DIP-switch, 1,024 codes) |
Step 3: test and record
Stand at the usual distance and test open, stop and close. Write down which button does what and keep the old remote until the new one works.
Before you start
- Keep the gate clear and watch it while you test.
- Switch off mains before opening the motor cover; follow the maker’s manual.
- If the board memory is full, an old remote may need deleting first, as the manual explains.
Frequently asked questions
How do I add a new remote to my gate motor?
Put the receiver into learn mode and press the new remote’s button, or copy it from a working remote if the maker allows it.
Can any remote work with my gate?
Only one that matches the receiver’s brand protocol, frequency and code type. A universal remote works only with the code types listed on its product page.
How is the Nice RBA3 board programmed?
By the radio learn procedure in Nice’s manual for the board and OXI receiver; follow that sequence exactly.
What if my remote is discontinued?
Send a photo of the old remote and the board; a current model or a new receiver can usually replace it.
Related guides
gate remotes, receivers, gate remote not working, universal gate remote
Send a photo of your old remote on WhatsApp so we can match it.
