Sliding Gate Motor Installation in Dubai, Sharjah, Abu Dhabi and Ajman

Automatic Gate supplies and installs sliding gate motors in Dubai, Sharjah, Abu Dhabi and Ajman, and delivers products to all UAE emirates. Each job starts with a site survey. The motor is matched to the gate’s weight, length and how often it opens, using the manufacturer’s ratings.

Ask on WhatsApp with a photo for a price.

Pick a motor by gate weight

Sliding motors are rated mainly by gate weight, and some also give a maximum gate length. Choose a motor rated above the real gate weight. Sand in the track, stiff wheels and wind on solid panels all add load.

The sliding motors we list start at 400 kg, for example the Nice ROBUS 400. They run up to 2,500 kg on a single-phase supply, for example the Nice RUN 2500, and up to 4,500 kg on a three-phase 400 V supply, for example the Beninca BISON 45 OTI. The heaviest models need a three-phase supply on site; we check this at the survey. Duty cycle also matters when a gate opens many times a day.

Our gate motor weight chart lists the manufacturer figures shown on the product pages. Send the gate length, height and material, with a photo, and we will suggest models from that chart. You can also browse the sliding gate motors category, including LIFE, BFT (for example the BFT DEIMOS AC A600), Nice and Somfy (for example the Somfy Elixo 800 RTS).

What a sliding installation includes

  • A level base or foundation plate for the motor beside the opening
  • A toothed rack fixed along the gate leaf, matched to the motor’s pinion; nylon and steel racks are listed separately when a kit does not include the rack
  • Photocells across the opening and a flashing or warning light, and safety edges where the maker or the site calls for them
  • Setting the open and close limits, the force and any slow-down
  • Pairing the remotes and showing you the manual release

Kit contents vary. Some listings include remotes, photocells, a light and rack; others are the motor only. Each product page has an “In the box” list where the kit is confirmed. Quotes for supply and installation are given per job after the site survey. You can also buy the motor alone and have it delivered anywhere in the UAE.

From survey to handover: how an installation works

  1. Site survey. We look at the gate, the posts or pillars, the ground and the power supply, and ask how the gate is used day to day. Send photos first if you can, so we know what to look at.
  2. Measurement and gate check. We measure the leaf length, height and opening and estimate the gate weight. We also check that the gate moves freely by hand, because a stiff or misaligned gate should be put right before any motor is fitted. A sliding gate needs a straight, level track and enough space for the leaf to open fully.
  3. Motor selection. We match the motor or barrier to the gate weight, leaf length and the number of times the gate opens each day, using the manufacturer’s ratings. You get the model options with the reasons for each.
  4. Quotation. You receive a written quotation that lists the motor, the accessories and the installation work, so you can see exactly what is included.
  5. Installation. Our technicians fix the motor and any rack, brackets or foundation plate, run the cabling and connect the control board to the power supply.
  6. Safety devices and testing. We fit the photocells and warning light, and safety edges where the maker or the site calls for them. Then we set the limits and force and run the gate through full cycles until it stops and reverses as it should.
  7. Handover and user training. We show you how to use the remotes, how to open the gate by hand with the manual release during a power cut, and what simple care keeps it running smoothly. Keep the track clear of sand and stones, and tell us if the gate starts to slow or catch.

We install across Dubai, Sharjah, Abu Dhabi and Ajman, with delivery to all UAE emirates.

Photocells across the opening stop or reverse the gate if the beam is broken, and a flashing light warns that the gate is about to move. If the power fails, the gate is opened by hand with the manual release shown at handover. Whether a backup battery is suitable depends on the motor; we can advise after the survey.

Related installation pages

See also automatic gate installation, swing gate installation and parking barrier installation.

Ask on WhatsApp with a photo for a price.

Frequently asked questions

Which sliding motor do I need for my gate weight?

Choose one rated above your gate’s weight, and check any maximum gate length on the product page. Send the size and material on WhatsApp and we will suggest a model from the weight chart.

What is in a sliding gate kit?

It depends on the listing. Some kits include remotes, photocells, a flashing light and rack; others are the motor only. Each product page lists what is included.

Do you install sliding gate motors in Ajman, Sharjah and Abu Dhabi?

Yes, as well as Dubai. Product delivery is to all UAE emirates.

Does the gate need to move freely on a straight track before a motor is fitted?

Yes. We check that the gate moves freely by hand, because a stiff or misaligned gate should be put right before any motor is fitted. The track should be straight and level, with enough space for the leaf to open fully.

What happens in a power cut?

At handover we show you how to open the gate by hand with the manual release. Whether a backup battery is suitable depends on the motor; we can advise after the survey.