Swing Gate Motor Installation in Dubai, Sharjah, Abu Dhabi and Ajman

Automatic Gate supplies and installs swing gate motors in Dubai, Sharjah, Abu Dhabi and Ajman, and delivers products to all UAE emirates. Swing gates open like doors, so the motor has to suit each leaf’s length and weight and the space around the pillars. Each job starts with a site survey. The motor is matched using the manufacturer’s length and weight ratings together, and to how often the gate opens.

Ask on WhatsApp with a photo for a price.

Ram, articulated arm or underground

The swing motors we list fall into three types. A longer comparison sits on our site; the short version is:

  • Linear ram. A worm-screw actuator fixes between a bracket on the pillar and a bracket on the leaf. Examples we list include the BFT PHOBOS AC A25, the CAME ATI 5000 and the Beninca BOB50.
  • Articulated arm. A gear motor on the pillar drives a jointed arm that folds as the leaf opens. Use this when the hinges sit too far back for a ram. Send a photo of the hinge and pillar from above and we will advise from the motors we list.
  • Underground. The motor sits in a foundation box below the hinge, so nothing shows above ground. This needs excavation, a foundation box and drainage. Examples we list include the Nice L-FAB and the LIFE ERGO.

We do not list hydraulic swing operators, so this page does not offer hydraulic installation.

Sizing by leaf length and weight

Manufacturers rate swing motors by both leaf length and leaf weight. A longer leaf puts more load on the motor, so the same motor may take less weight on a 5 m leaf than on a 3 m one. The CAME ATI 3000, for example, is rated for 800 kg on a 2 m leaf but only 400 kg on a 3 m leaf. A long, solid leaf also catches more wind, which adds load on top of its weight.

Our gate motor weight chart groups examples by leaf length, from about 2 m (for example a Nice WINGO4KIT kit) up to 5 m (for example the CAME ATI 5000 and Beninca BOB50M). Some maker ratings for longer leaves assume an electric lock is fitted; we check this against your leaf at the survey.

Browse the swing gate motors category, including BFT, Beninca and Nice.

What the installation covers

The job covers the brackets or, for an underground motor, the foundation box and drainage; the motors and control board; photocells and a flashing light; safety edges where the maker or the site calls for them; opening angles, force and the delay between leaves; then remotes and the manual release on each motor. Kit contents vary: some listings are kits for a two-leaf gate, others a single motor. Each product page lists what is included. Quotes are given per job after the survey. You can also buy the motor alone and have it delivered anywhere in the UAE.

Heat and outdoor conditions

Where a product page lists an operating temperature range, that is the range the maker rates the motor for, and we check it against your site. In summer, high outdoor temperatures add to the heat a motor builds up as it runs. If a gate opens many times a day, choose more duty headroom, not just more length or weight capacity.

From survey to handover: how an installation works

  1. Site survey. We look at the gate, the posts or pillars, the ground and the power supply, and ask how the gate is used day to day. Send photos first if you can, so we know what to look at. For a swing gate we also look at the space behind each leaf when it is open, the slope of the driveway, and the distance from the hinge to the pillar face.
  2. Measurement and gate check. We measure the leaf length, height and opening and estimate the gate weight. We also check that the gate moves freely by hand, because a stiff or misaligned gate should be put right before any motor is fitted. The pillars must be solid enough to take the motor brackets, and the hinges should let each leaf swing freely.
  3. Motor selection. We match the motor or barrier to the gate weight, leaf length and the number of times the gate opens each day, using the manufacturer’s ratings. You get the model options with the reasons for each.
  4. Quotation. You receive a written quotation that lists the motor, the accessories and the installation work, so you can see exactly what is included.
  5. Installation. Our technicians fix the motor and any rack, brackets or foundation plate, run the cabling and connect the control board to the power supply.
  6. Safety devices and testing. We fit the photocells and warning light, and safety edges where the maker or the site calls for them. Then we set the limits and force and run the gate through full cycles until it stops and reverses as it should.
  7. Handover and user training. We show you how to use the remotes, how to open the gate by hand with the manual release during a power cut, and what simple care keeps it running smoothly. Keep the hinge area clear.

We install across Dubai, Sharjah, Abu Dhabi and Ajman, with delivery to all UAE emirates.

Related installation pages

See also automatic gate installation, sliding gate installation and parking barrier installation.

Ask on WhatsApp with a photo for a price.

Frequently asked questions

Which swing motor suits my leaf length and weight?

It depends on both figures together, not on length alone. Send the leaf length, weight and pillar photos on WhatsApp and we will suggest a model rated for both, using the weight chart.

Ram, articulated arm or underground: how do I choose?

A linear ram suits leaves where the hinges sit close enough to the pillar face for the rod to mount straight onto the leaf. An articulated arm handles deeper pillars that a ram cannot clear. An underground motor hides in a foundation box under the hinge and needs excavation and drainage. Our ram vs arm vs underground guide explains the types; we confirm the fit at the survey.

Do you install swing gate motors in Sharjah, Abu Dhabi and Ajman?

Yes, as well as Dubai. Product delivery is to all UAE emirates.

Do underground motors need extra work on site?

Yes. The motor sits in a foundation box below the hinge, so excavation and drainage are part of the job. Foundation boxes may be sold separately from the motor kit; each product page lists what is included.